Step-by-Step Heat Press Settings for the Hotronix IQ360 with Signature Leatherette Patches
Our Signature Leatherette is designed for Universal Heat Press Settings compared to standard materials on the market. It responds best to balanced, moderate settings that preserve quality while increasing production speed.
Recommended Starting Point (for Dual Press Users):
- Top Heat: 280°F
- Bottom Heat: 320°F
- Time: 25 - 40 seconds
- Pressure: Begin with medium pressure until a clean, even press is achieved.
- Sheet: Always use a silicone sheet during pressing.
Important Notes:
These settings are intended as a starting range only. Every press and environment varies, so we strongly recommend testing and fine-tuning for your specific setup and preferences.
Please note that our Signature Leatherette was developed specifically for Universal applications—allowing for higher production volumes without changing settings for other brands you may be using currently and not sacrificing quality.
Recommended Platen (Perfect Press: 112-1):
For optimal results with the 112-1 setting, ensure your patches are sized appropriately for your heat press. Patches that are too large may not achieve proper adhesion across the widest portions of the design.
Important: Please verify that your patch dimensions and total area are compatible with your press capacity. Additional presses, increased pressure, or adjusted heat settings may be required for larger designs. We cannot be held responsible for application issues related to patches or designs that exceed the dimensions or area capacity of your heat press equipment.
Step-by-Step Process:
- Preheat your Hotronix IQ360 - Set top platen to 280°F and bottom platen to 320°F
- Prepare your hat - Position it on the appropriate platen (112-1 recommended for Richardson 112 style hats)
- Position your Signature Leatherette patch - Place it adhesive-side down on the desired location
- Cover with silicone sheet - This protects the material and ensures even heat distribution
- Apply medium pressure - Press for 25-40 seconds depending on your specific press and environment
- Allow to cool - Let the patch cool completely before handling for best adhesion
- Test and adjust - Fine-tune time, temperature, and pressure as needed for your setup
Whether you're creating custom hat patches for your small town merch or producing bulk orders for wholesale clients, our Signature Leatherette delivers consistent, professional results every time.
